聚四氟乙烯（PTFE）微粉—B01，粒径12微米左右，不仅保持了PTFE原有的优良性能，而且还具有分散性好、易于与其他材料均匀混合等优点，广泛应用于合成材料的共性，可以提高基材的润滑性、耐磨性、不粘性和阻燃性，此外还可以作为橡胶、金刚石、砂轮、刹车片、酚醛树脂等的添加剂。

在合成材料方面，PTFE微粉—B01可用作合成材料的改性剂。据报道，目前市场上具有改进的润滑性能的工程塑料很多都掺加了PTFE微粉。例如，在聚酰胺(PA)、聚缩醛(POM)、聚碳酸酯(PC)、丙烯晴—丁二烯—苯乙烯共聚物(ABS)、聚丙烯（PP）聚对苯二甲酸丁二酯（PBT）、聚对苯二甲酸乙二酯（PET）…和其他高性能工程树脂中加入5%—15%的PTFE微粉，就能改善这些材料所制备的零件的磨耗、摩擦性和黏性滑动等性能，可用于制造齿轮、轴承和滑轮等，也可用来代替起润滑作用的金属部件，减少制件的重量和降低维修成本。

橡胶方面，PTFE微粉—B01可提高橡胶表面性能和体积性能，如在有机硅橡胶、丁晴橡胶、氟橡胶、三元乙丙橡胶和聚氯丁二烯等中加入5%-8%（质量分数）的PTFE微粉，可以提高主体聚合物的摩擦性能、磨损性能和脱模行为，提高橡胶的破碎强度，而橡胶的弹性行为无明显破坏，这就可以减少橡胶在脱模过程中造成的撕裂现象。

砂轮方面，加入聚四氟乙烯（PTFE）微粉—B01制成的砂轮，PTFE会以粉末形式分布在砂轮里面，当砂轮被磨损时，PTFE粉末脱离砂轮，形成一种耐高温并耐磨润滑剂的作用。因而能改善砂轮的耐磨损性能。另外，加入聚四氟乙烯粉末，也可以一定程度增加砂轮的韧性，降低刚性，从而在使用中减少砂轮发脆现象。

金刚石方面，聚四氟乙烯（PTFE）微粉—B01作为金刚石材料添加剂，采用一系列方法与金刚石粉末结合，制备出的金刚石制品摩擦系数降低，其摩擦磨损性能提高。

Teflon® PTFE 62 X

Polytetrafluoroethylene

DuPont Fluoropolymers

产品说明：

DuPont ™ Teflon ® PTFE 62 X is a polytetrafluoroethylene fine powder resin used primarily for paste extrusion. Teflon ® PTFE 62 X offers the excellent combination of properties typical of the Teflon ® fluoropolymer resins:

• non-aging characteristics;

• chemical inertness to nearly all industrial chemicals and solvents;

• exceptional dielectric properties, stable with frequency and temperature;

• toughness and flexibility;

• low coefficient of friction;

• non-stick characteristics;

• negligible moisture absorption;

• excellent weather resistance;

• service temperature up to 260°C (500°F);

• useful properties at -240°C (-400°F);

• moderate stiffness and high ultimate elongation.

Compared with other grades of PTFE fine powder, Teflon® PTFE 62 X is a premium resin that has increased thermal stability, superior flex life, superior stress crack resistance, low permeability and high clarity.

Teflon® PTFE 62 X is designed for processing at medium to high reduction ratios of 100:1 to 600:1. It is particularly suitable for production of high tubing, spaghetti tubing and wire coating. This grade is also highly suitable for after-processing technologies such as flanging, welding, blow molding and convoluting.

Teflon® PTFE 62 X meets the following re:

• ASTM D4895-10, Type I, Grade 4, Class B

Typical Applications
Teflon® PTFE 62 X is mainly used for tubing installed in demanding applications. It includes high performance articles such as reinforced hose re the ultimate in reliability and performance in chemical, pharmaceutical and automotive industry in use with hydraulic fluid, hydrocarbon fuel or reactive gas. Such applications are for example overbraided hoses for fuel assemblies and brake systems.

物性信息：

   PTFE是白色、无臭、无味、的粉状物，俗称“塑料王”。具有优良的化学稳定性、密封性、高润滑不粘性、电绝缘性和良好的抗老化耐力。使用工作温度达250℃。耐低温，低温下具有良好的机械韧性，即使温度下降到－196℃，也可保持5%的伸长率。耐腐蚀，对大多数化学药品和溶剂表现出惰性，能耐强酸强碱、水和各种有机溶剂。耐候性好，有塑料中佳的老化寿命。高润滑，是固体材料中摩擦系数低者。不黏附，是固体材料中表面张力小者，不黏附任何物质