供应PA-765A（高流动），PA-765B（中冲）PA-766（高冲）；耐候级耐热耐光性PA-764；耐热级耐光性PA-764B；
2.供应ABS台湾奇美耐热级PA-777B,超耐热级777D,超高耐热级777E；
3.供应ABS台湾奇美透明级PA-758、PA-758R；
4.供应ABS台湾奇美电镀级PA-727；
5.供应ABS台湾奇美食品级PA-737；
6.供应ABS台湾奇美通用级PA-757；
7.供应ABS台湾奇美一般级PA-747S、PA-707、PA-717C、PA-709；
8.供应ABS台湾奇美高抗冲级PA-746、PA-747（安全帽头盔、摩托车挡版、鞋后跟、雪地运动用品等）；
9.供应ABS台湾奇美高刚性级PA-757K、PA-707K；                                                                                                                                                                                                             

                                                                             Supply of PA-765A (high flow) , PA-765B (medium impact) Pa-766(Takaoki) , weather grade heat and light grade PA-764, heat and light grade PA-764B, 2. ABS Taiwan Chimei heat-resistant class PA-777B, Super heat-resistant Class 777D, super high heat-resistant class 777E; 3. ABS Taiwan chimei transparent class PA-758, PA-758R; 4. ABS Taiwan chimei plating class PA-727; 5. ABS Taiwan Chi Mei Food Grade Pa-737; 6. ABS Taiwan Chi Mei General Class PA-757; 7. ABS Taiwan Chi Mei General Class PA-747S, Pa-707, PA-717C, PA-709; 8. ABS Taiwan Chi Mei High Impact Pa-746, Pa-747(helmet, motorcycle block, shoe heels, snow sports goods, etc.) ; 9. ABS Taiwan chimei high rigid class PA-757K, pa-707k;ABS resin is a kind of polymer with high yield and wide application. It unifies the properties of PS, San and BS organically, and has excellent mechanical properties of toughness, hardness and rigid phase e Abs is a terpolymer of acrylonitrile, butadiene and styrene. A stands for acrylonitrile, B for butadiene and S for styrene. General Performance: the appearance of Taiwan's ABS is opaque ivory color granular material, its products can be painted into colorful, and has a high gloss. ABS relative density is about 1.05, low water absorption. ABS with other materials, the combination of good, easy surface printing, coating and coating treatment. ABS has an oxygen index of 18-20 and is a flammable polymer with a yellow flame, black smoke and a special cinnamon smell. Mechanical properties ABS has excellent mechanical properties, its impact strength, can be used at very low temperature; ABS wear resistance is excellent, good dimensional stability, but also has oil resistance, can be used for medium load and speed bearing. The creep resistance of ABS is higher than that of PSF and PC, but lower than that of PA and POM. The bending strength and compressive strength of ABS are poor in plastics. The mechanical properties of ABS are greatly affected by temperature.The thermal deformation temperature of ABS is 93 ~ 118 ° C, and the product can be increased by about 10 ° C after annealing treatment. ABS can still show some toughness at -40 ° C, and can be used in the temperature range of -40 ~ 100 ° C. Electrical properties of ABS electrical insulation is good, and almost not affected by temperature, humidity and frequency, can be used in most environments. The environmental properties of ABS are not affected by water, inorganic salts, alkali and many acids, but soluble in ketones, aldehydes and chlorinated hydrocarbons. The weatherability of ABS is poor, and it is easy to be degraded under the action of ultraviolet light. The processability of Taiwanese chimei ABS plastics, ABS, like PS, is a Thermoplastic with excellent processability, which can be processed by common processing methods. The melt fluidity of ABS is better than that of PVC and PC, but worse than that of PE, PA and PS, similar to that of POM and HIPS, the melt viscosity of ABS is non-Newtonian fluid, and the melt viscosity is related to processing temperature and shear rate, but it is more sensitive to shear rate. ABS has good thermal stability and is not easy to be degraded. ABS water absorption rate is high, should be dry before processing. The drying conditions for general products are 80 ~ 85 ° C for 2 ~ 4 hours, and 70 ~ 80 ° C for special products (such as electroplating) for 18 ~ 18 hours. ABS products are easy to produce internal stress during processing, the magnitude of internal stress can be tested by immersing in glacial acetic acid, if the stress is too high and the product is forbidden to stress cracking, annealing treatment should be carried out, the concrete condition is put in the hot air circulation drying box of 70 ~ 80 ° C for 2 ~ 4 hours, and then cooled to room temperature